OBS can stream and record together. Independent recording quality uses extra resources, so compare a shared-output baseline with the separate recording settings you need and inspect both results.
Decide whether the local recording should share stream settings or use independent quality, then verify the combined workload and saved file.
In this guide
Before you start
- A working stream configuration and a safe private or test destination.
- A recording folder with room for the intended sample.
Define what the local file is for
If the recording is only a reference copy, sharing stream-oriented settings may be sufficient. If it will become an edited video, you may want different quality or audio choices. Write down the specific limitation of the current file before adding a second encoding workload.
OBS supports recording while streaming and documents extra resource use when recording quality or its encoder is independent of the stream. The benefit therefore needs to be checked alongside stability. A high-quality local preset is not automatically sustainable when the game and broadcast are active together.
Keep a record of the working combination
Note the stream settings, recording settings, enabled recording tracks and current application workload. Use a short repeatable sequence with gameplay or presentation motion, a spoken line and a scene change. Make the sequence challenging enough to resemble the real session.
Confirm the test destination is appropriate before starting a stream. A local recording-only run can establish that the file settings work, but it does not exercise both outputs simultaneously. Plan the combined rehearsal as a separate check and keep its result clearly labeled.
Test shared and independent recording deliberately
Check the baseline outputs
Start the intended streaming test and a local recording with the current known settings. Run the sample passage, stop cleanly and inspect the saved file.
Look for: You know how the combined workload behaves before changing recording quality.
Change only the recording configuration
In a duplicate profile, select the independent recording quality or encoder settings you actually need. Preserve the stream settings for this comparison.
Look for: The next test isolates the extra recording work instead of changing both outputs at once.
Repeat with both outputs active
Run the same passage while streaming and recording together. Compare performance observations, the local file and the platform’s test playback where available.
Look for: The desired local improvement is visible and neither output has acquired a new failure.
Listen to the recording as its own deliverable
Do not assume the local file contains exactly what a live listener hears. Inspect which recording tracks are enabled and play the intended track in your player or editor. A good stream mix can coexist with a recording that omits the microphone because its assignments differ.
For an editing handoff, tell the editor which track is the full reference mix and which tracks are isolated sources, if you use them. Keep the multitrack setup in the dedicated routing guide rather than changing it during a video-quality comparison. Separate questions are easier to diagnose.
Choose reliability before a theoretical quality upgrade
If the separate configuration causes overload, reduce its cost or return to the stable baseline while you investigate. OBS performance guidance treats scene rendering and encoding as related workloads that still need to fit the system. The fact that either output works alone does not establish that both fit together.
Once the combination is stable, make a longer rehearsal and verify storage usage. Save the successful pair as a clearly named profile. Recheck after adding another camera, heavier graphics or a different game; the extra recording budget was established for a workload, not for every future scene.
Still stuck?
Streaming and recording work alone but fail together.
Compare the combined workload with shared recording settings, then add independent recording quality only as the system can sustain it.
Sources & references
Based on the linked first-party OBS documentation checked on 4 November 2026. The exercises and acceptance checks are editorial workflows for you to run; no hands-on OBS session or hardware benchmark is claimed.
- OBS — Standard Recording Output Guide ↗Checked 2026-11-04
- OBS — Encoding Performance Troubleshooting ↗Checked 2026-11-04
Spotted something out of date? Let Alex know.
How we put our guides together ↗