Streaming help · Streamlabs

Send a Streamlabs Scene to a Meeting with Virtual Webcam

Start the virtual webcam, choose it in the meeting app and check the picture and microphone as separate inputs.

START HERE

Install and start Virtual Webcam in Streamlabs Desktop settings, then choose the Streamlabs virtual camera in the meeting application's camera selector. Verify the receiving application's preview. Select and test the meeting microphone separately; choosing a virtual camera does not prove the meeting has the intended audio.

The other endpoint sees the intended scene changes and hears one clear voice.

In this guide
Before you start
  • Streamlabs Desktop and a meeting app that accepts a selectable camera.
  • Permission to install the virtual webcam component if requested.
  • A private practice meeting or receiving-app preview.

Identify the result you need

A meeting app receives the camera source you select, not necessarily the picture currently displayed on your physical webcam. Prepare a dedicated meeting scene with the camera, presentation or programme content you mean to show. Keep private dashboards and account pages out of that scene.

Decide how the meeting should sound before starting. If you only need your voice, a direct microphone choice may be sufficient. If you also need programme audio, use the meeting app's supported sharing or audio route and test that separately. Do not add several virtual audio devices merely because the camera picture is missing.

Work through the setup

  1. Prepare an unmistakable scene

    Create or select the intended scene and put a harmless label in it, such as Meeting Test. Check the full frame and close unneeded captured windows.

    Look for: The outgoing picture is identifiable and contains no accidental desktop content.

  2. Start Virtual Webcam

    Open Streamlabs settings, find Virtual Webcam, install the component if needed and start it. Keep Streamlabs open during the receiving-app check.

    Look for: The virtual camera is running before the meeting app tries to select it.

  3. Choose the receiving camera

    In the meeting app's video settings, choose the Streamlabs camera entry. If the app was open before installation, close and reopen its camera selector or restart the app.

    Look for: The receiving preview shows the labeled scene instead of the physical webcam's direct feed.

  4. Check both media paths

    Join a private test, switch between two prepared scenes and speak a short sentence. Ask another participant or use an appropriate test recording to confirm the received result.

    Look for: The other endpoint sees the intended scene changes and hears one clear voice.

Check the actual result

Use a directional object or text to check mirroring. Some meeting apps mirror only your own self-view. Do not reverse the Streamlabs scene until you know whether the audience actually receives reversed text. The recipient's view is the useful reference.

Check the edges of the received frame for cropping and letterboxing. If the app uses a different aspect ratio, put essential text away from the edges and test again. Increasing the source resolution alone will not correct the wrong crop or a badly chosen layout.

Make the next session predictable

Before ending the practice, switch to a neutral scene and confirm what the meeting receives when you stop the virtual webcam. This gives you a predictable way to leave or pause the presentation during the real call.

Keep a note of the working camera and microphone selections inside the receiving app. Recheck those choices after updates or reconnecting devices; an app can remember a different input than the one you expect.

Still stuck?

The camera entry is missing

Confirm installation completed, restart the receiving app and review its camera permissions. Check the current Streamlabs documentation for your supported operating system.

The picture works but audio is silent

Inspect the meeting microphone selection and mute state. Diagnose the audio route independently from Virtual Webcam.

The wrong scene appears

Inspect the active Streamlabs output and test with a distinct label. Do not troubleshoot the physical webcam if the virtual source is already receiving video.

Try it on your own setup

Start small: try the free files or continue with a guide for the part you’re working on.

OBS Virtual Camera on Discord: How to Set It Up ↗

Sources & references

Documentary review of current first-party help pages and indexed first-party excerpts, checked November 4, 2026. The diagnostic sequence and rehearsal examples are original editorial guidance; Foxdip did not operate a private account, run these broadcasts or measure performance. Expected results are checks for the reader to perform, not claimed test results.

  1. Streamlabs — Virtual Camera ↗Checked 2026-11-04

Spotted something out of date? Let Alex know.

How we put our guides together ↗
READ NEXT

A few places to go from here.

All stories

OBS Virtual Camera on Discord: How to Set It Up

Start OBS Virtual Camera, pick it as your camera in Discord, and choose what Discord sees: the whole program, one scene or one source. Set the mic apart.

Keep Private Notifications Out of Your Stream Capture

Reduce the capture area, review Windows notification exceptions and test with harmless messages before going live.