OBS Studio · Practical guide

OBS Projector Output: Send a Clean Picture to a Second Screen

Choose a source, scene or Program projector, route it to the intended monitor, and confirm what an audience-facing screen actually shows.

START HERE

OBS projectors can display a source, scene, Preview or Program in a window or on a monitor. Select the feed by purpose and inspect the receiving screen before using it in a room.

Choose a source, scene or Program projector, route it to the intended monitor, and confirm what an audience-facing screen actually shows.

In this guide
Before you start
  • A second display recognized by the computer.
  • A harmless test scene and access to the receiving screen.

Choose the feed before choosing the monitor

A room screen might need slides without the stream overlay, while your personal monitor needs the final show. Those are different feeds. Write one sentence describing what the second screen should contain and what should never appear there, then choose the corresponding source or scene.

OBS offers projector outputs for sources, scenes, Preview, Program and multiview. A projector of one scene remains a view of that chosen composition; a Program projector follows the current program output. Make this distinction visible with a large test label before connecting an audience-facing display.

Identify the physical screen with harmless content

Display numbering can be difficult to remember after docking a laptop or reconnecting cables. Use a test image rather than a private desktop when establishing the route. Stand where the audience will stand and confirm which screen changes; the operator’s assumption is not enough.

Keep OBS controls on a screen you can still reach. If the projector fills your only usable control surface, recovering from an incorrect scene becomes awkward. For a venue rehearsal, also note the display’s input selection so the next operator can distinguish an OBS routing issue from a screen on the wrong input.

Open a small test before filling the screen

  1. Inspect the intended composition

    Open the chosen scene or source and verify the picture with a large identifying label. Use a windowed projector first if you are unsure of the feed.

    Look for: The test window contains exactly the visual composition intended for the second screen.

  2. Send it to the receiver

    For a source or scene, right-click it and choose its Fullscreen Projector option, then select the intended display. For a final-output feed, choose the Program projector control in your OBS layout.

    Look for: The receiving screen shows the chosen feed without the OBS editing interface.

  3. Change the live scene deliberately

    Switch the main show to another harmless scene and observe the receiver. Compare the result with the feed choice you made.

    Look for: A Program feed follows the show, while a dedicated scene feed behaves as the separate composition you selected.

Test the screen as the room will use it

Read the smallest text from the expected viewing distance. Check whether important material is clipped by the display’s presentation settings and whether the cursor intrudes. A picture that looks excellent on the operator’s monitor can still be difficult to read from the back of a room.

Treat sound as a separate check. A visible projector image does not prove that the desired audio is reaching the venue’s speakers. Use the intended audio route and a brief, comfortable-level sound test. Avoid judging success solely by the image or by hearing sound through your own headphones.

Rehearse closing and reopening the arrangement

OBS has projector options for hiding the cursor, keeping a window on top and restoring projectors on exit. Enable only the behaviors useful for this installation. Then close and reopen OBS and verify the display assignment again, particularly if the laptop may be undocked between sessions.

Keep a simple fallback scene ready if the dedicated feed becomes unavailable. Write down the selected feed and physical receiver in the event notes. This turns a one-time successful connection into a setup another person can rebuild without experimenting in front of the audience.

Still stuck?

The room screen follows the wrong scene.

Check whether you opened a fixed scene projector or a Program projector; select the feed that matches the intended behavior.

Keep troubleshooting

Check the model and connection before trying another change. The device page gathers the related symptoms.

More help with OBS Studio ↗

Sources & references

Based on the linked first-party OBS documentation checked on 4 November 2026. The exercises and acceptance checks are editorial workflows for you to run; no hands-on OBS session or hardware benchmark is claimed.

  1. OBS — Power of Projectors ↗Checked 2026-11-04

Spotted something out of date? Let Alex know.

How we put our guides together ↗
READ NEXT

A few places to go from here.

All stories

OBS Capturing the Wrong Monitor? Pick the Right Screen

Use your system's Identify displays to match each number to a screen, then pick that display in your OBS capture source. Check again after a cable change.

Stream Layout Readability: Can Viewers See What Matters?

Check your webcam, text and overlays in a small player. Keep game information visible and give each scene a clear focus.