OBS Studio · Practical guide

OBS Virtual Camera Missing on macOS 13–15: Check the Extension

Approve the OBS camera extension in the documented macOS 13, 14 or 15 settings location, then verify it with a harmless test scene.

START HERE

On macOS 13–15, verify a compatible OBS version and allow its camera extension in the matching system settings. Restart OBS, start the virtual camera, and reselect it in the receiving app. Later macOS layouts need a separate current check.

Approve the OBS camera extension in the documented macOS 13, 14 or 15 settings location, then verify it with a harmless test scene.

In this guide
Before you start
  • OBS 30+ on macOS 13, 14 or 15; later OS settings are outside this procedure.
  • A test scene and a receiving app where you can choose a camera.

Separate a missing device from the wrong picture

First determine whether OBS Virtual Camera is absent from the receiving app or present but showing an unexpected scene. Those are different problems. This workflow addresses extension availability; a device that already appears may instead need output-selection or scene checks.

OBS documents a modern virtual-camera component for OBS 30 and later on macOS 13 and later. The older component in OBS 29.1 and earlier is incompatible with macOS 14. Record both installed versions before applying instructions intended for another generation.

Prepare a scene that makes success obvious

Use a large label such as OBS CAMERA TEST on a plain background. That gives you a clear success signal without involving a physical webcam, capture device or private desktop. Keep the receiving app’s camera settings open in a test call or preview rather than a live meeting.

If OBS itself does not display the test scene correctly, fix that composition first. Virtual-camera availability should be checked with a known picture. Otherwise you could solve the extension problem and still mistake a blank scene for a failed camera installation.

Approve the extension in the matching macOS settings

  1. Find the appropriate system location

    On macOS 13 or 14, inspect System Settings → Privacy & Security → Security. On macOS 15, inspect General → Login Items & Extensions → Camera Extensions. Do not assume these locations apply to a later OS layout.

    Look for: You are checking the location documented for the supported macOS generation.

  2. Allow OBS and restart it

    Approve the OBS camera extension when offered, authenticate as required by macOS, and restart OBS. Do not approve unrelated software as part of this check.

    Look for: The system has allowed the intended OBS extension to load.

  3. Start and select the test camera

    Start Virtual Camera in OBS, reopen or refresh the receiving app’s camera selection if needed, and choose OBS Virtual Camera.

    Look for: The receiving preview shows the unmistakable test label.

Check the receiver after the extension loads

If one receiving app sees the camera and another does not, keep the OBS test scene unchanged. Compare the receiving app’s camera selection, permissions and restart behavior. Reinstalling OBS repeatedly is unlikely to explain why a specific receiver alone has a stale device list.

If no receiver lists the device, confirm the approved extension and OBS version again. For a later macOS release, verify its current approval workflow before following these older menu paths. Record where the process stops: approval unavailable, start action failing, or device missing only in one receiver.

Restore the intended scene only after the test passes

Replace the test label with the composition you actually want to send and inspect its framing in the receiving preview. Check whether the receiving app mirrors only its own preview or changes the delivered view before compensating by flipping sources in OBS.

Treat microphone selection as a separate part of the meeting or recording setup. Seeing the OBS picture does not establish that the intended microphone is selected. Keep the working OS version, OBS version and receiving app in your notes so a later update can be compared with a known configuration.

Still stuck?

The camera appears in one app but not another.

Keep the test scene fixed and inspect the receiving app’s device list, camera permission and restart behavior before reinstalling OBS.

Keep troubleshooting

Check the model and connection before trying another change. The device page gathers the related symptoms.

More help with OBS Studio ↗

Sources & references

Based on the linked first-party OBS documentation checked on 4 November 2026. The exercises and acceptance checks are editorial workflows for you to run; no hands-on OBS session or hardware benchmark is claimed.

  1. OBS — Virtual Camera Troubleshooting ↗Checked 2026-11-04

Spotted something out of date? Let Alex know.

How we put our guides together ↗
READ NEXT

A few places to go from here.

All stories

OBS Virtual Camera on Discord: How to Set It Up

Start OBS Virtual Camera, pick it as your camera in Discord, and choose what Discord sees: the whole program, one scene or one source. Set the mic apart.

Webcam Freezes in OBS When Another App Opens

Check camera ownership and reconnect the existing source before rebuilding the scene.